今朝一早上左朗家幫佢睇個火牛幾多W，之後約埋Jack(因為佢順手去攞mouse)出左深水渉買火牛(470W)+display卡(XFX 9600GSO)。

買完哂野約埋arka去朗家幫佢裝野…我地三條友裝果陣真係笑爆咀..講左好多爛野-.-未試過同人裝機咁好笑@@

300W舊牛

佢家的狗狗

Jack 新Razer Mouse

今日一早帶埋部notebook上左呀朗屋企幫佢試下佢果度收唔收到高清手指，去到試都收得幾穩定～佢屋企果兩隻狗狗好得意！之後出左深水涉食sushi幫去買野。買左兩條1GB ram 加一隻mix高清手指。

走果陣等果部８１等左成九個字先有車！唔知旺角果邊搞咩，返到上去佢屋企都7點半，之後裝埋條ram試埋隻手指～玩到十一點半先走人返屋企。

The new server have been distributed two ip address!! And the two IP address has different sub-net 🙂

Moreover, I have discovered that each IP has it’s own bandwidth, which means that the bandwidth are not sharing to each other, they are unique 25Mbps bandwidth within Windows & Linux.

Pass few days being server testing and cloning documents, the server works well today!! It is much faster than the old one, and the cpu usage is still less than 10% while it processing a web server, ventrilo server, ftp server & ssh within vmware by running Linux on a windows environment.

However, now it still have one problem that is the networking problem. Since my server has too many connections at the same time and the router loading was very high, so that the server will spike ping sometimes. In case, I will turn the router to bridge mode, so that it can access the internet directly, but there are some security issue there, so that I need to install a firewall with it.

So far, the server is running smoothly at all 🙂

去書展的同日，和記無啦啦打電話黎話提早裝３０Ｍ，約左７點鐘，所以六點就離開左書展返歸。

裝完之後我即刻試speed test…點知真係同ArKa一樣 …裝30M=100M…因為ArKa 之前都裝過..又係咁~

ping hk.yahoo.com 1ms 真係超快，個modem仲要有4個port位俾我任插，4個port都可以攞到獨立真IP!

不過…出海都係唔夠HKBN快 🙁