Skip to content

Pass few days being server testing and cloning documents, the server works well today!! It is much faster than the old one, and the cpu usage is still less than 10% while it processing a web server, ventrilo server, ftp server & ssh within vmware by running Linux on a windows environment.

However, now it still have one problem that is the networking problem. Since my server has too many connections at the same time and the router loading was very high, so that the server will spike ping sometimes. In case, I will turn the router to bridge mode, so that it can access the internet directly, but there are some security issue there, so that I need to install a firewall with it.

So far, the server is running smoothly at all 🙂

去書展的同日,和記無啦啦打電話黎話提早裝30M,約左7點鐘,所以六點就離開左書展返歸。

裝完之後我即刻試speed test...點知真係同ArKa一樣 ...裝30M=100M...因為ArKa 之前都裝過..又係咁~

ping hk.yahoo.com 1ms 真係超快,個modem仲要有4個port位俾我任插,4個port都可以攞到獨立真IP!

不過...出海都係唔夠HKBN快 🙁

今日終於搞掂左部新server! Q6600, 4GB RAM, 630GB Hard Disk, 380W Power Supply

真係好多謝TOM(Poor Guy) 同 Tony(GENESIS) 幫手砌呢部野~

開頭返到黎砌...砌好開機idel六十幾度,跟住試用program 谷到佢full load, boost到九十幾一百度....

跟住...知唔掂...所以即刻睇下個heat sink 係唔係插得唔好..點知原來真係...好彩最後我同PG一手一腳搞返掂,而家idel 4x度, full load 60-70度!~

尋晚allenkan借左隻高清手指俾我試..試下我果邊收唔收到,結果用手指內置果條天線收得好穩定,始終我呢邊空曠。

但有一個問題就係收唔到原先標清果4個台,但其餘9個數碼台收得哂。發現呢個問題後,我即刻搬部機去我呀媽間房插埋大廈天線黎試,結果全部13個台收得哂!我諗係因為手指內置果條天線唔夠勁,可能因為果4個標清台頻率比較低,所以較難用條cheap 天線收。

可惜我自己間房冇天線喇!雖然係咁,但我覺得冇乜所謂,始終而家果4個標清台用模擬仲有得睇,買手指都係為左睇高清台姐~

睇緊高清台果陣用埋硬解我粒CPU(C2D T7100 1.82Ghz)使用率都係大約60-70%,睇標清台果陣大約20-40%,所以你粒U冇返咁上下都唔好買手指住~